Solutions

NAS and iSCSI Rackmount Storage Appliances

NAS and iSCSI Storage Appliances with SFF Drives

NAS and iSCSI Tower Storage Appliances

Modular and Cluster NAS and iSCSI Storage Appliances

Expansion Units for NAS and iSCSI Storage Appliances
More DNF storage solutions
 
Get a Quote
Tech Support
Warranty Options
RMA Forms
Shipment Damage Policy
Contact Support
Resources
Press Releases
Media Coverage
Case Studies
White Papers
Technical Information
Storage Capacity Calculator
Corporate Logos
Official Blog
About DNF
Company Profile
Partial Customer List
Privacy Policy
Employment Opportunities
Solutions & Technology

Home » Solutions & Technology » Modular and Cluster NAS and iSCSI Storage Appliances

FlexStor M1m

Modular 1U NAS+iSCSI Storage Appliance Engine

The FlexStor M1m Dual Octa-Core Xeon RAID NAS+iSCSI rackmount storage appliance engine is the key ingredient to Dynamic Network Factory's modular NAS+iSCSI storage solutions. The FlexStor M1m is available specifically customized for SAS or Fibre Channel direct-attached storage subsystems: The M1m supports up to four 6Gb SAS ports, up to eight 12Gb SAS ports, up to eight 8Gb Fibre Channel ports, or up to four 16Gb Fibre Channel ports for the ultimate in modular NAS+iSCSI storage solutions.

High performance features include the latest 8 to 22-core Broadwell-EP Xeons in dual processor configurations, up to 3TB of DDR4 system memory, and teamed 1 Gigabit or 10 Gigabit Ethernet connectivity.

This fault-tolerant data storage comes in a convenient, space-saving 1U rackmount chassis with hot-swappable drives and trays. Your operating system is protected with RAID 1 across two hot-swappable 15,000RPM SAS disk drives on an ultra high-performance 12Gbps SAS/SATA hardware RAID controller. An optional RAID cache flash memory backup module helps protect against data loss in the event of an environmental power failure.

A 750 Watt dual redundant 80-PLUSŪ Platinum 94.14% high-efficiency certified power supply with hot-swappable modules ensures continuous up-time and reduced electrical consumption.

Our base configuration provides quad 1 Gigabit ports teamed together and load-balanced for 4Gb of NAS and iSCSI connectivity. Want 10Gb instead? No problem with a very affordable upgrade to our on-board quad 10Gb configuration or choose from a variety of 10Gb Ethernet server adapters with RJ-45, SFP+, SR Optical, or LR Optical connectivity.

FlexStor NAS+iSCSI storage appliances are powered by Windows Storage Server 2016 Standard Edition 64-bit operating system. Windows Storage Server 2016 provides both network file-based shared storage (NFS) as well as iSCSI target block storage. Windows Storage Server's Resilient File System (ReFS) improves data integrity, availability and scalability.

Windows Storage Server 2016 supports a wide variety of robust features such as thin provisioning with just-in-time allocations, data deduplication to massively reduce the primary storage footprint on NTFS data volumes, and BranchCache to optimize performance over the WAN. Since there are no license limits on the number of connections, there is no need to purchase expensive licenses for each of your host systems.

FlexStor NAS+iSCSI storage appliances are perfect for adding storage to a new or existing virtual environment. Enhanced support for Hyper-V includes shared VHDs (Virtual Hard Disks), resizing of VHDs while a Virtual Machine is running, storage Quality of Service (Qos), as wells as improved performance for live migrations and cross-version live-migrations. An improved iSCSI target now supports VHDX (VHD 2.0) for capacities up to 64TB and supports SMI-S to enable end-to-end provisioning.

FlexStor's NFS network-attached storage protocol can be used for backend storage for Virtual Machines running on VMware ESX or ESXi.

The FlexStor M1m NAS+iSCSI rackmount storage appliance is a great fit for small business or home offices that are looking for a robust storage solution with redundancy to protect your data and prevent downtime combined with the latest in storage management software, but in an affordable package.

Windows Storage Server 2016 Standard edition is now a cluster-ready operating system. Expensive upgrades to an Enterprise edition of Windows is no longer needed. Purchase two FlexStor M1m NAS+iSCSI Storage Appliance Engines and one or more RAID subsystems for an affordable yet scalable NAS+iSCSI clustered storage solution with high-availability for all of your storage needs.

System Overview

  • Modular Configurations for SAS or FC-Attached RAID Subsystems
  • Two 15K SAS Disk Drives Mirrored at RAID 1 for OS
  • Two Intel Broadwell-EP Xeon Processors (8 to 22-Cores Each)
  • Up to 3TB System Memory (32GB Standard)
  • Choice of 6Gb/12Gb SAS or 8Gb/16Gb FC Storage HBA(s)
  • Quad Copper Gigabit or Quad 10Gb Ethernet Controller
  • Redundant 80-PLUS Platinum Hot-Swappable Power Supply
  • Windows Storage Server 2016 64-Bit Operating System

Key Features

FlexStor M1m Dual Octa-Core Xeon RAID NAS+iSCSI 1U Rackmount Storage Appliance Engine

Base Configuration:

  • Two Hot-Swappable 300GB RAID Certified 15,000RPM SAS Disk Drives Mirrored at RAID 1 for the Operating System
  • Dual 2.10GHz Intel Octa-Core 8GT Broadwell-EP Xeon Processors with 20MB Shared Cache
  • 32GB High Speed DDR4 System Memory with Error Correction
  • Ultra High Performance 12Gbps SATA/SAS Hardware RAID Controller with 1GB Cache Ported to Four Hot-Swappable 12Gbps Drive Bays
  • Host Bus Adapter Depending on Model
    • Dual-Port SFF-8088 8x 6Gbps SAS HBA for Connectivity to SAS-Attached RAID Subsystem(s)
    • Dual-Port Mini-SAS HD SFF-8644 12Gbps SAS HBA for Connectivity to SAS-Attached RAID Subsystem(s)
    • Dual-Port 8Gbps LC Optical HBA for Connectivity to Fibre Channel-Attached RAID Subsystem(s)
    • Dual-Port 16Gbps LC Optical HBA for Connectivity to Fibre Channel-Attached RAID Subsystem(s)
  • Supports up to One Additional Network or Host Bus Adapter
  • Intelligent Platform Management Interface (IPMI) v2.0 with Virtual Media and KVM-Over-LAN
  • Quad Copper Gigabit Ethernet Ports for NAS and iSCSI Connectivity
  • Internal DVD+/-RW Drive
  • Windows Storage Server 2016 Standard Edition Embedded 64-bit Operating System
  • Features NAS, iSCSI, Thin Provisioning, Data Deduplication, DFS Replication, NIC Teaming & Load Balancing, Enhanced Support for Hyper-V, Cluster-Ready
  • Hot-Swappable 750 Watt Dual Redundant 94.14% High Efficiency 80-PLUSŪ Platinum Certified Power Supply
  • 1U 19" Rackmount Chassis with Quick-Release Rapid Mounting Rails

Available Upgrade Options:

  • RAID Controller Flash Memory Backup Module to Protect Against Data Loss in the Event of Power Failure
  • Dual 2.1GHz 8-Core, 3.2GHz 8-Core, 2.2GHz 10-Core, 2.4GHz 10-Core, 2.2GHz 12-Core, 2.4GHz 14-Core, 2.1GHz 16-Core, 2.6GHz 16-Core, 2.3GHz 18-Core, 2.2GHz 20-Core, or 2.2GHz 22-Core Broadwell-EP Xeon Processors
  • 64GB, 128GB, 256GB, 384GB, 512GB, 1.5TB or 3TB High Speed DDR4 System Memory
  • 1Gb Ethernet Server Adapters with RJ-45
  • 10Gb Ethernet Server Adapters with RJ-45, SFP+, SR Optical, LR Optical Options
  • 3Gbps, 6Gbps, or 12Gbps SAS Host Bus Adapters
  • 4Gbps, 8Gbps, or 16Gbps Fibre Channel Host Bus Adapters
  • SAS or FC-Attached RAID Subsystem with Single or Dual RAID Controllers
* Supports a maximum of one additional full-height PCI-E slot.

Technical Specifications

Chassis Specifications:
  • Form Factor: 19" 1U Rackmount with Quick-Release Rapid Mounting Rails
  • Drive Trays: 4 Hot-Swappable 3.5"
  • Backplane: 12Gb SATA/SAS
  • Optical: DVD+/-RW Disc Drive
  • Cooling: 4 x 40mm Cooling Fans
  • Power Supply: Redundant 750 Watt Hot-Swappable 94.14% High Efficiency 80-PLUSŪ Platinum Power Supply
    • AC Voltage: 100 - 170V, 50-60Hz, 62.5-0 Amp
  • Controls: Power On/Off, System Reset
  • Indicators: Power LED, Hard Drive Activity LED, 2x Network Activity LEDs, System Overheat LED, Fan Fail LED, UID (Universal Information) LED
  • Input/Output Ports:
    • 4 RJ-45 Gigabit Ethernet LAN Ports
    • 1 RJ-45 Dedicated IPMI LAN Port
    • 2 Rear USB 3.0 Ports
    • 2 SAS or FC Ports (Depending on Model)
    • 1 VGA Port for System Maintenance Only
  • Operating Temperature: 5°C ~ 40°C (41°F ~ 104°F)
  • Operating Relative Humidity: 8% ~ 90% Non-Condensing
  • Non-Operating Temperature: -40°C ~ 60°C (-40°F ~ 140°F)
  • Non-Operating Relative Humidity: 5% ~ 95% Non-Condensing
  • Dimensions: 1.7"(H)x 17.2"(W) x 29"(D)

Windows Storage Server 2016 Specifications:

  • Failover Clustering with Cluster Shared Volumes, Dynamic cluster Quorums, Cluster Node Health Detection, Deployment, Updating & Monitoring
  • NAS (Network-Attached Storage) Appliance & iSCSI Storage System
  • No Limit on Number of Users & Supports Unlimited SMB Connections
  • NFS v2, NFS V3, NFS v4.1, SMB 3.0 Support
  • Windows Management Instrumentation to Manage Physical & Virtual Storage
  • Continuous Availability for SMB, iSCSI and NFS
  • Data Deduplication to Massively Reduce Primary Storage Footprint on NTFS Data Volumes
    • Includes Support for Cluster Shared Volumes & Deduplication of Live Virtual Desktop Infrastructure (VDI) Virtual Machines that Reside on File Servers Connected via SMB
  • DFS Namespaces & DFS Replication to Efficiently Replicate Folders Across Multiple Servers & Sites
  • Thin Provisioning with Just-in-Time Allocations
  • Network Adapter Teaming & Load-Balancing to Increase Network Performance and Availability
  • File-Based Shared Storage for Applications (Microsoft Hyper-V, SQL Server, IIS)
  • NFS can be used as Backend Storage for Virtual Machines Running on VMware ESX and ESXi
  • Enhanced Support for Hyper-V
    • Shared VHDs (Virtual Hard Disks)
    • Resizing of VHDs while a VM is Running
    • Storage Quality of Service (QoS)
    • Improved Performance for Live Migrations & Cross-Version Live-Migrations
  • Improved iSCSI Target Supports VHDX (VHD 2.0) for Capacities up to 64TB
    • Up to 544 Sessions & up to 256 Logical Units per iSCSI Target Server
    • Supports SMI-S to Enable End-to-End Provisioning using System Center Virtual Machine Manager
  • Resilient File System (ReFS) that Improves Data Integrity, Availability and Scalability with Database Cloning & Corruption Recovery
  • BranchCache Peer to Peer & Hosted Cache with Server Message Block (SMB) to Optimize Performance over the WAN
  • Ability to Manage, Configure, Deploy Multiple Virtual Desktops and Sessions from a Single Point

Order Information

Part Number System Standard Ports
FLM1m6SAS FlexStor M1m Dual Octa-Core Xeon NAS+iSCSI Cluster-Ready Storage Appliance Engine for 6Gb SAS-Attached RAID Solutions Dual SAS 6Gb
FLM1m12SAS FlexStor M1m Dual Octa-Core Xeon NAS+iSCSI Cluster-Ready Storage Appliance Engine for 12Gb SAS-Attached RAID Solutions Dual SAS 12Gb
FLM1m8FC FlexStor M1m Dual Octa-Core Xeon NAS+iSCSI Cluster-Ready Storage Appliance Engine for 8Gb FC-Attached RAID Solutions Dual FC 8Gb
FLM1m16FC FlexStor M1m Dual Octa-Core Xeon NAS+iSCSI Cluster-Ready Storage Appliance Engine for 16Gb FC-Attached RAID Solutions Dual FC 16Gb

System Upgrades

Part Number Description
FLXmuBBU Add RAID Controller Flash Backup for FlexStor NAS+iSCSI

Processor Upgrades

FLMmuDXEON08C21 Upgrade Modular FlexStor to Dual Eight-Core 2.1GHz Xeon Processors
FLMmuDXEON08C32 Upgrade Modular FlexStor to Dual Eight-Core 3.2GHz Xeon Processors
FLMmuDXEON10C24 Upgrade Modular FlexStor to Dual Ten-Core 2.4GHz Xeon Processors
FLMmuDXEON12C22 Upgrade Modular FlexStor to Dual Twelve-Core 2.2GHz Xeon Processors
FLMmuDXEON14C24 Upgrade Modular FlexStor to Dual Fourteen-Core 2.4GHz Xeon Processors
FLMmuDXEON16C21 Upgrade Modular FlexStor to Dual Sixteen-Core 2.1GHz Xeon Processors
FLMmuDXEON16C26 Upgrade Modular FlexStor to Dual Sixteen-Core 2.6GHz Xeon Processors
FLMmuDXEON18C23 Upgrade Modular FlexStor to Dual Eighteen-Core 2.3GHz Xeon Processors
FLMmuDXEON20C22 Upgrade Modular FlexStor to Dual Twenty-Core 2.2GHz Xeon Processors
FLMmuDXEON22C22 Upgrade Modular FlexStor to Dual Twenty-Two-Core 2.2GHz Xeon Processors

Memory Upgrades

FLMmu64GB Upgrade Modular FlexStor to 64GB System Memory
FLMmu128GB Upgrade Modular FlexStor to 128GB System Memory
FLMmu256GB Upgrade Modular FlexStor to 256GB System Memory
FLMmu384GB Upgrade Modular FlexStor to 384GB System Memory
FLMmu512GB Upgrade Modular FlexStor to 512GB System Memory
FLMmu1.5TB Upgrade Modular FlexStor to 1.5TB System Memory
FLMmu3TB Upgrade Modular FlexStor to 3TB System Memory

1Gb and 10Gb Upgrade Options

FLXmuGIG2cv2 Add Dual-Port Copper Gigabit Ethernet Server Adapter
FLXmuGIG4cv2 Add Quad-Port Copper Gigabit Ethernet Server Adapter
FLXmu10GbC Upgrade from On-Board Quad 1Gb to Quad 10Gb RJ-45 Ports
FLXmu10Gb2RJ45 Add Dual-Port 10Gb RJ-45 Ethernet Server Adapter
FLXmu10Gb2SFP+ Add Dual-Port 10Gb SFP+ Ethernet Server Adapter
FLXmu10Gb1SR Add Single-Port 10Gb SR Optical Ethernet Server Adapter
FLXmu10Gb2SR Add Dual-Port 10Gb SR Optical Ethernet Server Adapter
FLXmu10Gb1LR Add Single-Port 10Gb LR Optical Ethernet Server Adapter
FLXmuSFP+GBIC-SR SFP+ SR Optics GBIC Module for SFP+ Ethernet Server Adapter
FLXmuSFP+GBIC-LR SFP+ LR Optics GBIC Module for SFP+ Ethernet Server Adapter

Host Bus Adapters

HBAE3GbSAS-2CH Two x4 SFF-8088 PCI-E (x8) 3Gbps SAS Host Bus Adapter
HBAE6GbSAS-2CH Two x4 SFF-8088 PCI-E (x8) 6Gbps SAS Host Bus Adapter
HBAE12GbSAS-2CH Two x4 SFF-8644 PCI-E (x8) 12Gbps SAS Host Bus Adapter
HBAE12GbSAS-4CH Four x4 SFF-8644 PCI-E (x8) 12Gbps SAS Host Bus Adapter
HBAE4GbFC-2CH PCI-E (x4) 4Gb Fibre Channel Host Bus Adapter, Dual-Port
HBAE8GbFC-2CH PCI-E (x8) 8Gb Fibre Channel Host Bus Adapter, Dual-Port
HBAE16GbFC-1CH PCI-E (x8) 16Gb Fibre Channel Host Bus Adapter, Single-Port
HBAE16GbFC-2CH PCI-E (x8) 16Gb Fibre Channel Host Bus Adapter, Dual-Port

Spare Parts

FLM1mtray Spare Drive Tray for FlexStor M1m
FLM1mps Spare Hot Swappable Power Supply Module for FlexStor M1m

CONTACT DNF




Call 510.265.1122 to contact a DNF storage specialist today!
26250 Eden Landing Rd, Hayward, CA 94545


OUR CUSTOMERS

Like us on Facebook Follow us on Twitter Watch us on YouTube Connect with us on LinkedIn Subscribe to our Blog

© 1998-2024 Dynamic Network Factory
All rights reserved.